« previous next »
Pages: [1]   Go Down

Author Topic: YSCB Feed Gone  (Read 3528 times)

Offline A380.

  • Newbie
  • *
  • Posts: 5
YSCB Feed Gone
« on: February 14, 2021, 06:35:38 PM »
 Hi
I was disappointed to see the Canberra feed gone from live atc.  I’m happy to provide feed but need assistance on how do this?
Logged


Offline optoisolated

  • Newbie
  • *
  • Posts: 4
  • If at first you don't succeed, avoid skydiving.
Re: YSCB Feed Gone
« Reply #1 on: March 11, 2021, 07:16:56 AM »
I've love to see Canberra back as well. I listened to that one a lot.

Equipment you will need:
  • Scanner (Uniden Bearcat for example) or RTL-SDR device
  • Raspberry Pi or an old computer
  • USB Sound card with Line input
  • Suitable antenna

Dave, the guy that runs LiveATC already has a bunch of pre-canned software to get you going as well as step-by-step guides to getting it all stood up. Happy to help if you need any :)
Logged

Offline A380.

  • Newbie
  • *
  • Posts: 5
Re: YSCB Feed Gone
« Reply #2 on: March 28, 2021, 08:04:10 PM »
Hi
I have a bunch of RTLs and Raspberry. 

What do I do next?
Logged

Offline geodementia

  • Newbie
  • *
  • Posts: 21
Re: YSCB Feed Gone
« Reply #3 on: May 13, 2021, 06:04:03 AM »
A380 - Did you get any further with this one?  I'm in the Canberra area and have provided LiveATC feeds previously so can help you out if you still need assistance
Logged

Offline A380.

  • Newbie
  • *
  • Posts: 5
Re: YSCB Feed Gone
« Reply #4 on: July 09, 2021, 06:49:34 AM »
No, due to work commitments and cold weather.  A bit of a set back but have managed to put up a 30ft mast, deciding which antenna to grace the top alongside my adsb antennas. I will reach out to you when I'm ready to work on the computer side of things. thx :)
« Last Edit: July 09, 2021, 06:53:40 AM by A380. »
Logged
Pages: [1]   Go Up
« previous next »