LiveATC Discussion Forums

Air Traffic Monitoring => Listener Forum => Topic started by: A380. on February 14, 2021, 06:35:38 PM

Title: YSCB Feed Gone
Post by: A380. on February 14, 2021, 06:35:38 PM

 Hi
I was disappointed to see the Canberra feed gone from live atc.  I’m happy to provide feed but need assistance on how do this?

Title: Re: YSCB Feed Gone
Post by: optoisolated on March 11, 2021, 07:16:56 AM

I've love to see Canberra back as well. I listened to that one a lot.

Equipment you will need:

• Scanner (Uniden Bearcat for example) or RTL-SDR device
• Raspberry Pi or an old computer
• USB Sound card with Line input
• Suitable antenna

Dave, the guy that runs LiveATC already has a bunch of pre-canned software to get you going as well as step-by-step guides to getting it all stood up. Happy to help if you need any :)

Title: Re: YSCB Feed Gone
Post by: A380. on March 28, 2021, 08:04:10 PM

Hi
I have a bunch of RTLs and Raspberry. 

What do I do next?

Title: Re: YSCB Feed Gone
Post by: geodementia on May 13, 2021, 06:04:03 AM

A380 - Did you get any further with this one?  I'm in the Canberra area and have provided LiveATC feeds previously so can help you out if you still need assistance

Title: Re: YSCB Feed Gone
Post by: A380. on July 09, 2021, 06:49:34 AM

No, due to work commitments and cold weather.  A bit of a set back but have managed to put up a 30ft mast, deciding which antenna to grace the top alongside my adsb antennas. I will reach out to you when I'm ready to work on the computer side of things. thx :)