LiveATC Discussion Forums

Air Traffic Monitoring => Listener Forum => Topic started by: JetScan1 on February 02, 2018, 04:11:58 PM

Title: New ACY Giantkiller feed
Post by: JetScan1 on February 02, 2018, 04:11:58 PM

Thanks for this dedicated feed.

You have the W107 frequency listed as 135.275, it should be 135.725.

FYI these are the listed Giantkiller frequencies (in range of ACY) as per the official SOP dated September 2015.

118.125 = W-386, W-387 Check In/Out
135.225 = W-105, W-106 Check In/Out
135.725 = W-107 Check In/Out

238.100 = W-386, W-387 Check In/Out (Primary)
249.800 = W-386, W-387 Check In/Out (Secondary)
312.200 = W-386 Common Area (A through F)
350.050 = W-386 Common Area (G through J)
346.600 = W-386 Common Area (K) and W-387 Common Area (All)
338.100 = W-105, W-106 Check In/Out
305.250 = W-105, W-106 Common Area
255.000 = W-107 Check In/Out
339.725 = W-107 Common Area
337.225 = Common Area (Air-Air)

Might help as only two of the UHF frequencies you have listed can be found in the SOP ? Unless you are using more current info ?
 
JS



 

Title: Re: New ACY Giantkiller feed
Post by: dave on February 03, 2018, 11:39:57 AM

JS-

Your data is likely more current. The feed has been updated to monitor your list.

Dave