« previous next »
Pages: [1]   Go Down

Author Topic: Factory Resetting the BC360XT ~ DTW feed  (Read 6652 times)

Offline kc135dood

  • Newbie
  • *
  • Posts: 38
    • http://fstankers.freeforums.org/
Factory Resetting the BC360XT ~ DTW feed
« on: March 14, 2010, 09:52:31 AM »
I have looked through the manual and still can't find how to reset the scanner.  I think I programmed it the wrong way so now when it's tuned into any frequency.  You can listen to it through the speaker and it'll play on for about 4 seconds, then pause and totally go silent for about 3.  When I received this it didn't do it, but now that I programmed it, it does.  I guess I just won't program it and just put the frequency in and just keep that saved.
Logged


Offline EdmontonFireRadio

  • Newbie
  • *
  • Posts: 36
  • VE6EFR
    • Edmonton Fire Radio
Re: Factory Resetting the BC360XT ~ DTW feed
« Reply #1 on: March 15, 2010, 08:32:29 PM »
There's a KDTW feed?
Logged

Offline joeyb747

  • Hero Member
  • *****
  • Posts: 1745
  • Nothing Like A 747!
Re: Factory Resetting the BC360XT ~ DTW feed
« Reply #2 on: March 15, 2010, 08:39:32 PM »
Logged

Offline dave

  • Site Founder
  • Administrator
  • Hero Member
  • *****
  • Posts: 4598
    • LiveATC.net
Re: Factory Resetting the BC360XT ~ DTW feed
« Reply #3 on: March 16, 2010, 06:54:33 AM »
I am not aware of a BC360 - there was a BC350 line but not a BC360, as far as I know.

The DTW feed is in testing, but reception has been very poor so it hasn't been published yet.
Logged

Offline joeyb747

  • Hero Member
  • *****
  • Posts: 1745
  • Nothing Like A 747!
Re: Factory Resetting the BC360XT ~ DTW feed
« Reply #4 on: March 16, 2010, 06:57:28 AM »
Looking forward to the KDTW feed! I hope it all works out!  8-)
Logged

Offline kc135dood

  • Newbie
  • *
  • Posts: 38
    • http://fstankers.freeforums.org/
Re: Factory Resetting the BC360XT ~ DTW feed
« Reply #5 on: March 23, 2010, 10:14:26 PM »
I just fixed my main problem which was the sudden short in receiving and delivering the audio.  Now onto reception.. I'll look for a better place to put it, then I'll have to either run the cord or set up a computer there.
Logged

Offline dave

  • Site Founder
  • Administrator
  • Hero Member
  • *****
  • Posts: 4598
    • LiveATC.net
Re: Factory Resetting the BC360XT ~ DTW feed
« Reply #6 on: March 23, 2010, 10:17:03 PM »
Let me know if I can help in any way - just drop me an email.
Logged

Offline johnm1019

  • Newbie
  • *
  • Posts: 25
Re: Factory Resetting the BC360XT ~ DTW feed
« Reply #7 on: March 25, 2010, 02:02:53 PM »
Quote from: kc135dood on March 23, 2010, 10:14:26 PM
I just fixed my main problem which was the sudden short in receiving and delivering the audio.  Now onto reception.. I'll look for a better place to put it, then I'll have to either run the cord or set up a computer there.

Thank you for your time and effort in this!!! A KDTW feed would be greatly appreciated!
Logged
Pages: [1]   Go Up
« previous next »