airtraffic

Author Topic: KLEX feed setup  (Read 22809 times)

Offline mbasanta

  • Newbie
  • *
  • Posts: 1
KLEX feed setup
« on: October 18, 2022, 17:11:26 UTC »
I finished my setup for KLEX (Lexington, KY). It's scanning approach, departure, tower, and ground. I'm about 4.5 miles from the airport with no terrain obstacles between. I get decent audio, but it was better when it was coming straight out of the scanner. I may try tracking down some nicer mono cables and see if that helps a little. I have a 1/4 wave ground plane antenna on my roof about 30' up.

I'm also pushing ADS-B data to adsbexchange.com on the same Raspberry Pi.

As soon as my feed gets approved it'll be up and running.



Offline rentkonim

  • Newbie
  • *
  • Posts: 6
    • اجاره خودرو با راننده
Re: KLEX feed setup
« Reply #1 on: November 30, 2022, 19:51:20 UTC »
With the mentioned specs, I think it can last 30 minutes.