KGFL Unicom and area freq's including Albany (KALB) APP/DEP flights North of the field and ZBW_CAM (Boston CTR - Cambridge) Sector Feed Pics...
The story:
First, tried to make feed server from an older P4 1.4 AMD processor and asus mobo w/ 512ram, 20 Gig HD (ran very sloooooowww). But, for some reason, the mobo and or proccessor wouldnt clock more than 100mhz FSB so the clock only allowed a 1.01mhz processor speed. Every time I went into the BIOS, the Hardware page that changed these goodies locked up and thus told me that even after a BIOS flash, that it wasnt going to cooperate. So. OS install #1 no good...
I bought a 2.4 P4 Intel w/ asus mobo and 1 gig ram online, used... along with a reconditioned hd 80gig (I wasnt told it was refurbished, says in small print on the label that ofcourse, I didnt read being excited it was 'new' and slapped it in) drive lasted 4 days, enough time to install os, fully update and install all drivers and goodies... then took a cr*p... Went Tango Uniform on me... Lovely....
So, bought a new Western Digital 160Gig and all new ribbon cables just to be safe. Installed OS and drivers and updates and software a 3rd time... (mabey its a charm, er something)... And now, perhaps from using different scanners, Im getting a scanning click every time the scan cycles on one of the scanners. No matter what combination I use, at least ONE of the scanners has a very audible click when the other is cycling freq's.
I ordered an identical scanner to the Pro-2040 scanner I use for ZBW and that one sounds great, so, hopefully identical scanners will minimize this effect... I wonder if each scanner has a resistance unique to its model, and thus forces the adjacent attatched scanner to read its cycle if the other scanner has a higher or lowere resistance on the signal in, er something... Im just fishing at straws, becasue, it changes depending on the combination of scanners attatched...
So, when the new 2040 comes in it will be replacing the handheld i replaced the 2039 with. when the 2039 is attatched, the click comes out of the 2040 I am using for ZBW which I want to sound great, the traffic on that is far more frequent than the KGFL and area Unicoms.
So, I will update pics when that one comes in and I really hope that minimizes the clicks...
Update: 02/02/09
Added Bearcat BCT15's, clicking disapeared....