Author Topic: KBLM/3N6/N12 and KNEL/KWRI/ZNY feed  (Read 22402 times)

Offline JohnN

  • Full Member
  • ***
  • Posts: 105
  • KBLM, KWRI, KNEL, 3N6, N12, ZNY
    • Monmouth County Weather
KBLM/3N6/N12 and KNEL/KWRI/ZNY feed
« on: November 22, 2013, 04:04:33 PM »
Here's my setup for the KBLM/3N6/N12 and KNEL/KWRI/ZNY feeds. I started with a Uniden Bearcat BC245XLT(or something like that). Dave offered to sell me a Realistic Pro-2006, so I upgraded to that. He included the Amplifier with built in FM trap. We decided it was better to split the ZNY/WRI/NEL and BLM/3N6/N12 feeds, so he sent me another scanner along with a Raspberry Pi. Along with the Pi and scanner, he included a coax stub filter, to reduce interference from the nearby NOAA station. So here's my setup. The antenna is an Antennacraft ST-2.



Offline JohnN

  • Full Member
  • ***
  • Posts: 105
  • KBLM, KWRI, KNEL, 3N6, N12, ZNY
    • Monmouth County Weather
Re: KBLM/3N6/N12 and KNEL/KWRI/ZNY feed
« Reply #1 on: January 16, 2014, 01:09:23 AM »
Here's a picture of my mast. It's hard to take a level picture when you're standing on your roof on a windy day. Just for fun, I'll throw in a picture from the top of my roof, to show just how high the antenna is.
« Last Edit: January 16, 2014, 01:13:34 AM by JohnN »

Offline RonR

  • Moderator
  • Hero Member
  • *****
  • Posts: 1189
Re: KBLM/3N6/N12 and KNEL/KWRI/ZNY feed
« Reply #2 on: January 16, 2014, 08:33:59 AM »
Hey John,

Com'on, it's fun to do things on a roof on a windy day  :-D

Thanks for sharing the pics...

Ron