Author Topic: Memphis ARTCC KZME Sector/Frequency Charts  (Read 89518 times)

Offline davidp124

  • Newbie
  • *
  • Posts: 6
Memphis ARTCC KZME Sector/Frequency Charts
« on: May 16, 2007, 08:51:44 AM »
I have been looking for the longest time for ZME Lo/Hi/UH Frequency/Sector Charts.  Last set I have was for the late 90s.  Any help appreciated, maybe a set even on PDF.  Thanks for any assistance.

David
davidp124@aol.com
« Last Edit: May 20, 2007, 10:52:55 AM by davidp124 »



Offline zmeatc

  • Newbie
  • *
  • Posts: 38
Re: Memphis ARTCC KZME Sector/Frequency Charts
« Reply #1 on: October 22, 2007, 09:16:58 PM »
I've got them if you want.

Offline MIAMIATC

  • Hero Member
  • *****
  • Posts: 681
Re: Memphis ARTCC KZME Sector/Frequency Charts
« Reply #2 on: October 23, 2007, 03:44:57 PM »
count me in too please

                                         Thanks
                                          Mike

Offline hawker53

  • Newbie
  • *
  • Posts: 27
Re: Memphis ARTCC KZME Sector/Frequency Charts
« Reply #3 on: January 20, 2008, 08:20:55 PM »
Linky to Memphis Center sector freq's (high, med,Low), please?  BTW, 125.475 ultra-high and 132.425 med high are located at KORK now.  New antenna farm there.  Also, 133.025 Mem ultra-high is at KHRO, northern Arkansas.

Offline davidp124

  • Newbie
  • *
  • Posts: 6
Re: Memphis ARTCC KZME Sector/Frequency Charts
« Reply #4 on: December 07, 2008, 01:32:32 PM »
Hello ZMEATC:
Have not been on this board for so long but saw your post as to having ZME maps.  Yes, I would like to get a set.  Email if possible.

Thanks
David
davidp124@aol.com

Offline BMT

  • Newbie
  • *
  • Posts: 49
Re: Memphis ARTCC KZME Sector/Frequency Charts
« Reply #5 on: December 07, 2008, 04:37:03 PM »
Add me to the list.

BMT
Electronic Stalker

Offline nharris127

  • Newbie
  • *
  • Posts: 1
Re: Memphis ARTCC KZME Sector/Frequency Charts
« Reply #6 on: February 18, 2009, 10:17:59 PM »
Can i get a set also

Offline jetplanepilot

  • Newbie
  • *
  • Posts: 3
Re: Memphis ARTCC KZME Sector/Frequency Charts
« Reply #7 on: December 06, 2009, 11:13:00 PM »
If anyone received these any chance you could forward them to me?

heyoume@ymail.com

Thanks!

Offline davidp124

  • Newbie
  • *
  • Posts: 6
Re: Memphis ARTCC KZME Sector/Frequency Charts
« Reply #8 on: March 10, 2010, 09:09:44 PM »
I don't believe anyone has them.  I'll update the request for anyone who may have up-to-date ZME sector charts.  If possible, please send.  I'd like to have a current set.  Old set I have are 1990 version.

Thanks for any help.
David
Davidp124@aol.com

Offline AASper80dude

  • Newbie
  • *
  • Posts: 1
Re: Memphis ARTCC KZME Sector/Frequency Charts
« Reply #9 on: April 07, 2011, 06:59:26 PM »
If anyone has the radio frequencies for Memphis Center I'd appreciate it!!

Offline Bob2

  • Newbie
  • *
  • Posts: 17
Re: Memphis ARTCC KZME Sector/Frequency Charts
« Reply #10 on: April 08, 2011, 07:36:25 PM »
For just a list of frequencies, not a map, try radioreference.com.  Put ZME FREQS into a search engine and you might find the specific page,  http://www.radioreference.com/apps/db/?aid=2233.

Or start at http://www.radioreference.com, go to reference data base, select by state - Tennessee, Areawide frequencies, choose Agency drop down, ZME ARTCC.  The bottom of the page has sector names and numbers along with the frequencies, again not in map form.

Offline byoungblood

  • Newbie
  • *
  • Posts: 32
Re: Memphis ARTCC KZME Sector/Frequency Charts
« Reply #11 on: September 28, 2011, 10:09:34 AM »
If I can find a way of reducing the size of the maps, I'll try to make a copy of my center high/low maps. The ones we get as trainees are the sizes of small posters and are a bit difficult to scan.

KATL Feed Host

Offline Bob2

  • Newbie
  • *
  • Posts: 17
Re: Memphis ARTCC KZME Sector/Frequency Charts
« Reply #12 on: October 22, 2011, 06:35:22 PM »
Could you take digital photos of the maps, say 8 x 11 inch sections at a resolution around 2000 x 2500 pixels producing 3-5 Mb files.  Recent point-and-shoots will do that. Don't know about i-devices.  It would be important to have the paper flat on the floor or on a wall and shoot perpendicular so everything is in focus across individual sections.  If you can PM them to me thorough this site or off-list, I can stitch them together, etc. and make a PDF.

Bob